Racing Stands *On Special this week*

[VeeArrSixXeR]

http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669672&ASSORTMENT%3C%3East_id=1408474396670271&bmUID=1117804630692&bmLocale=fr_CA&PRODUCT%3C%3Eprd_id=845524443280943&assortment=primary&fromSearch=true

Vérifier les Canadians Tires qui les ont en stocks, certains sont en commandes spéciales :bigup:

[Daso]

are they quality items? normally that price is for one of the two stands...

[VeeArrSixXeR]

Assez bonne qualité compte tenu du prix, c'est un excellent deal pour les 2. En arrière, ils utilisent des spools, donc sur les hondas, faut fabriquer de quoi pour utiliser ce stand, par contre, les autres marques (kawa, suz, yam) ont déjà les trous pour visser les spools...

[maxpat82]

they do the job, and forthat price, you can't not having them! :D

[[ShInGo]]

J'en ai acheté un kit et je vois pas en quoi ca pourrait être mieux.

[maxse]

Im going tommorow morning....much cheaper than buying them from the states

[Eric_Ok]

pour ducati est-ce que ca marche??? kesse tu entend par spool??
tres merci beaucoup!:D

[maxse]

pour ducati est-ce que ca marche??? kesse tu entend par spool??
tres merci beaucoup!:D

buy it and try it...thats what im doing..

[maxpat82]

pour ducati est-ce que ca marche??? kesse tu entend par spool??
tres merci beaucoup!:D

les spool c'est les petite "bobinnes" que tu visse sur ton swingarm !
C'est la que le race stand s'appuie!

Je eput pas te dire, si tu as des trou avec des fillet pour mettre les spools
Vérifie!
Si oui il devrait etre pres de la bolt d'axle!
Sinon: tu devra modifier un peu le stand pour mettre des "palettes"(petit bras qui se place sous le swing arm directement)

[VeeArrSixXeR]

Les Ducati n'ont pas le swingarm sur un côté de la roue ?
Ca t'en prends un spécial comme lui:
http://www.andrew.cmu.edu/user/pnguyen/ducati.jpg

[maxpat82]

Les Ducati n'ont pas le swingarm sur un côté de la roue ?
Ca t'en prends un spécial comme lui:
http://www.andrew.cmu.edu/user/pnguyen/ducati.jpg


Pas une Monster!

[CoOlSlY]

I have my spools and my stands (i've been screwed for the front one on e-bay, anyway...), I just want to make sure to do it right and not drope the bike ;)... When using the rear stand, I put the stand on the spool and lift it directly? Do you usually put your front wheel straight instead of the usual "locked" position?

Thnx,

Sylvain

[VeeArrSixXeR]

I have my spools and my stands (i've been screwed for the front one on e-bay, anyway...), I just want to make sure to do it right and not drope the bike ;)... When using the rear stand, I put the stand on the spool and lift it directly? Do you usually put your front wheel straight instead of the usual "locked" position?

Thnx,

Sylvain

Yes, front wheel straight. It's hard at the beginning to do it yourself, but you hold the bike straight by your left hand on the seat, and you slide the rear stand under the spools with your right hand (note: switch hands if you are a right/left hander). Once the rear stand is under the spools, the bike will stay straight, and it's just a matter of pushing down on the stand and voilà :D

[maxse]

CT kirkland doesnt have any...there are 2 left in vaudreuil....i got mine :D

[HeReDaGo]

http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669672&ASSORTMENT%3C%3East_id=1408474396670271&bmUID=1117804630692&bmLocale=fr_CA&PRODUCT%3C%3Eprd_id=845524443280943&assortment=primary&fromSearch=true
Là y'est à 99.99$
C'était quoi le prix en spécial?

Et est-ce que ça fit direct sur un F3?

Merci!

[CoOlSlY]

http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669672&ASSORTMENT%3C%3East_id=1408474396670271&bmUID=1117804630692&bmLocale=fr_CA&PRODUCT%3C%3Eprd_id=845524443280943&assortment=primary&fromSearch=true
Là y'est à 99.99$
C'était quoi le prix en spécial?

Et est-ce que ça fit direct sur un F3?

Merci!

Y'était à 79.99$

[Daso]

I have these stands. The rear works well with my bike. Still havn't gotten the front to work properly yet, need to adust it.

[maxpat82]

those won't work for Honda cause Honda don't have place to bolt the spools on the swingarm! :(

Canadien Tire one are spools type and you need standard type!

if you know someone who can weld, you can modify them really easy though!

[Daso]

those won't work for Honda cause Honda don't have place to bolt the spools on the swingarm! :(

Canadien Tire one are spools type and you need standard type!

if you know someone who can weld, you can modify them really easy though!
true! just weld an M10 nut on each swing arm and you're good to go!

[VeeArrSixXeR]

http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669672&ASSORTMENT%3C%3East_id=1408474396670271&bmUID=1117804630692&bmLocale=fr_CA&PRODUCT%3C%3Eprd_id=845524443280943&assortment=primary&fromSearch=true
Là y'est à 99.99$
C'était quoi le prix en spécial?

Et est-ce que ça fit direct sur un F3?

Merci!

Si tu ne veux pas enlever la roue arrière, tu peux rentrer une tige de métal à travers l'essieu arrière et lever le derrière sur la tige de métal...
Regarde à travers le boulon de ta roue arrière, tu peux voir d'un côté à l'autre.

[maxse]

I returned mine...the pins in the front bent when i was trying lift it up

[maxpat82]

I returned mine...the pins in the front bent when i was trying lift it up

if the pin bent it's becaude it was to much out !

it shouldn't be out by more than 3/8"-1/2"

[maxse]

if the pin bent it's becaude it was to much out !

it shouldn't be out by more than 3/8"-1/2"


Thats probably what happened..ohhhh well....maybe ill buy them again if they go on sale :dunno:

[VeeArrSixXeR]

if the pin bent it's becaude it was to much out !

it shouldn't be out by more than 3/8"-1/2"

J'ai de la misère avec le mien en avant, j'ai même changé les vis pour des + longues pour qu'elles rentrent dans le trou....sinon, il ne veut jamais lever en avant :(

T'as pas une pic de ce que le stand a l'air en avant juste avant que tu lèves la moto ?

[maxpat82]

I've done mine by myself!
here's what mine looks like!
http://memimage.cardomain.net/member_images/4/web/400000-400999/400672_74_full.jpg

I'ved cut the "pin" almost by half the lengt since this pic!

the reason: if the pin is to long, it will rob on your axle!
So when you remove the axle, the pin will go through and you won't be able to replace your axle back in it's place! So you'll be screwed! :(

Trust me!

It's kinda totchy at the beginning to put the front stand on, but after a couple of time you'll be able to do it whitout too much trouble!

[Daso]

the reason: if the pin is to long, it will rob on your axle!
So when you remove the axle, the pin will go through and you won't be able to replace your axle back in it's place! So you'll be screwed! :(

Trust me!

It's kinda totchy at the beginning to put the front stand on, but after a couple of time you'll be able to do it whitout too much trouble!
That's my problem... The pin is too long and it hits the screws that tighten the axle clamp.

[Mr JDM]

sorry to resurrect an old thread but their website does not specify if they come in different colors or only in yellow?

[VeeArrSixXeR]

sorry to resurrect an old thread but their website does not specify if they come in different colors or only in yellow?

Only yellow.

[maxpat82]

So buy a can of spray paint of the color of your choice(~4$) and have fun :P

[Mr JDM]

So buy a can of spray paint of the color of your choice(~4$) and have fun :P

true thx *tu*